| Capacity: |
4,000 U.S. Gallons |
| Tank Shell: |
3/16" ASTM-A-36 Steel |
| Tank Ends: |
3/16" ASTM-A-36 Steel; Rolled and
Flanged with 6" Offset |
| Tank Baffles: |
3/16" ASTM-A-36 Steel; Fitted; 18"
Crawl Hole |
| Tank Runners: |
3/16" ASTM-A-36 Steel; Modified
U-shape; Full Length of Tank |
| Tank Shape: |
Modified Ellipse for Low Profile;
5" Radius on Tank Corners |
| Welding: |
Shell, Ends and Baffles are 100%
welded each side; tank runners are fully welded down
each side |
| Manhole: |
(1) 22" Round Manway located at
center of tank with hinged lid |
| Ladder: |
Left Side; 3/4" Pipe Construction;
Anti-Slip Material on ladder and Tank Walkway |
| Fenders: |
12 Gauge ASTM-A-36 Steel; Box Type;
Mounted to Tank |
| Mounting: |
1. Rubber Perma-slats between
runners and truck frame-No wood
2.Solid mounts at mid point and
behind rear axle both sides; Spring
loaded mounts
each side at front |
| Level Indicators: |
Front & Rear; 5/8" Clear
plastic tubing |
| Water Pump: |
Berkeley 4" x 4" B4ZRKMS; Hydraulic
Driven; 650GPM @ 85 PSI |
| Spray System: |
(6) cab controlled air operated
spray valves Cab Mounted Control Console Sprayhead
configuration is:(2) Front (2) Side (2) Rear Spray
valves use water pressure to open and air to close
|
| Loading: |
Hydrant fill with anti-siphon air
gap to National Fire Marshal Code Spec |
| Bumper: |
8" Pipe Bumper Attached to Frame
|
| Lights &
Wiring: |
Lights and reflectors DOT/ICC
compliant Truck-Lite Sealed Beam Lights Truck-Lite
Wiring Harness
|
| Paint: |
|