| Capacity: |
5,000
U.S. Gallons |
| Tank Shell: |
3/16"
ASTM-A-36 Steel |
| Tank Ends: |
3/16"
ASTM-A-36 Steel; Rolled and Flanged with 6" Offset
|
| Tank Baffles: |
3/16"
ASTM-A-36 Steel; Fitted; 18" Crawl Hole |
| Tank
Runners: |
3/16"
ASTM-A-36 Steel; Modified U-shape; Full Length of Tank
|
| Tank Shape: |
Modified Ellipse for Low Profile; 5"
Radius on Tank Corners |
| Tank Belly
Plate: |
3/16" ASTM-A-36 Steel Plate; Full
Width |
| Welding: |
Shell,
Ends and Baffles are 100% welded each side; tank runners
are fully welded down each side |
| Manhole: |
(1) 22"
Round Manway located at center of tank with hinged lid
|
| Ladder: |
Left
Side; 3/4" Pipe Construction; Anti-Slip Material on
ladder and Tank Walkway |
| Fenders: |
12
Gauge ASTM-A-36 Steel; Box Type; Mounted to Tank |
| Mounting: |
1. Rubber Perma-slats between
runners and truck frame-No wood
2. Solid mounts at
mid point and behind rear axle both sides; Spring
loaded
mounts each side at front |
| Level Indicators: |
Front
& Rear; 5/8" Clear plastic tubing |
| Water Pump: |
Berkeley 4" x 4" B4ZRKMS; Hydraulic
Driven; 650GPM @ 85 PSI |
| Spray System: |
(6) cab controlled air operated
spray valves |
| Sprayhead configuration is: |
(2) Front (2) Side (2) Rear 8'
Gravity Spreader Bar Spray valves use water pressure to open and air
to close |
| Loading: |
Hydrant
fill with anti-siphon air gap to National Fire Marshal
Code Spec |
| Bumper: |
8" Pipe
Bumper Attached to Frame |
| Lights &
Wiring: |
Lights and reflectors DOT/ICC
compliant Truck-Lite Sealed Beam Lights Truck-Lite
Wiring Harness |
| Paint: |
All steel is descaled and stress
relieved then primered Two Coat Top Finish ( One Color
Customer Choice) |