| Capacity: |
8,000
U.S. Gallons |
| Tank Shell: |
1/4"
ASTM-A-36 Steel |
| Tank Ends: |
1/4"
ASTM-A-36 Steel; Rolled and Flanged with 6" Offset
|
| Tank Baffles: |
1/4"
ASTM-A-36 Steel; Fitted; 18" Crawl Hole; Transverse
& Longitudinal |
| Belly Plate |
5/16" ASTM-A-36 Steel |
| Tank
Runners: |
1/2"
ASTM-A-36 Steel; Modified U-shape; Full Length of Tank
|
| Tank Shape: |
Modified Ellipse for Low Profile; 5"
Radius on Tank Corners |
| Welding: |
Shell,
Ends and Baffles are 100% welded each side; tank runners
are fully welded down each side |
| Manhole: |
(1) 22"
Round Manway located at center of tank with hinged lid
|
| Ladder: |
Rear Mounted;
3/4" Pipe Construction; Anti-Slip Material on ladder
and Tank and Walkway |
| Fenders: |
12
Gauge ASTM-A-36 Steel; Box Type; Mounted to Tank |
| Mounting: |
1. Rubber Perma-slats between
runners and truck frame-No wood
2. Solid mounts at
mid point and behind rear axle both sides;
Spring
loaded
mounts each side at front |
| Level Indicators: |
Front
& Rear; 5/8" Clear plastic tubing |
| Water Pump: |
Berkeley 4" x 3" B3JRMBM; Hydraulic
Driven; 1050GPM @ 245 PSI |
| Spray System: |
(6) cab
controlled air operated spray valves Cab Mounted Control
Console Sprayhead configuration is:(2) Front (2) Side
(2) Rear Spray valves use water pressure to open and air
to close |
| Loading: |
3" Hydrant
fill with anti-siphon air gap to National Fire Marshal
Code Spec |
| Bumper: |
8" Pipe
Bumper Attached to Frame |
| Lights &
Wiring: |
Lights
and reflectors DOT/ICC compliant Truck-Lite Sealed Beam
Lights Truck-Lite Wiring Harness
|
| Paint: |
All steel is descaled and stress
relieved then primered Two Coat Top Finish ( One Color
Customer Choice) |