| Capacity: |
4,000
U.S. Gallons |
| Tank Shell: |
3/16"
ASTM-A-36 Steel |
| Tank Ends: |
3/16"
ASTM-A-36 Steel; Rolled and Flanged with 6" Offset |
| Tank Baffles: |
3/16"
ASTM-A-36 Steel; Fitted; 18" Crawl Hole |
| Tank
Runners: |
3/16"
ASTM-A-36 Steel; Modified U-shape; Full Length of
Tank |
| Tank Shape: |
Modified Ellipse for Low Profile; 5"
Radius on Tank Corners |
| Welding: |
Shell,
Ends and Baffles are 100% welded each side; tank runners
are fully welded down each side |
| Manhole: |
(1) 22"
Round Manway located at center of tank with hinged
lid |
| Ladder: |
Left
Side; 3/4" Pipe Construction; Anti-Slip Material on
ladder and Tank Walkway |
| Fenders: |
12
Gauge ASTM-A-36 Steel; Box Type; Mounted to Tank |
| Mounting: |
1.
Rubber Perma-slats between runners and truck frame-No
wood
2. Solid mounts at mid point and behind rear
axle both sides; Spring
loaded
mounts each side at front |
| Level Indicators:
|
Front & Rear; 5/8" Clear plastic
tubing |
| Water Pump: |
Berkeley 4" x 4" self-priming; 650GPM
@85PSI; Hydraulic Driven |
| Spray System: |
(6) cab
controlled air operated cast aluminum spray valves Cab
Mounted Control Console |
| Spray Config: |
(2) front (2) side (2) rear
Spray valves use water pressure to open and
air to close |
| Loading: |
Hydrant fill with anti-siphon air
gap to National Fire Marshal Code Spec Self-priming
suction load |
| Chassis: |
Need cab to center of tandem of
120"-126" |
| Lights &
Wiring: |
Lights and reflectors DOT/ICC
compliant Truck-Lite Sealed Beam Lights Truck-Lite
Wiring Harness |
| Paint: |
All steel is descaled and stress
relieved then primered |